Interfaces

Especificações Técnicas

• SoC

  MTK G1200(MT8395)

• CPU

  Quad-core Arm Cortex-A78@2.2 ~ 2.4GHz

  Quad-core Arm Cortex-A55@2.0GHz

  based on Arm DynamIQ™ configuration

• GPU

  Arm Mali G57 MC5 GPU

  – OpenGL® ES1.1, ES2.0, and ES3.2

  – OpenCL® 1.1, 1.2 and 2.2

  – Vulkan® 1.1 and 1.2

  – Embedded high performance 2D image acceleration module

• APU

  Dual‑core Al Processor Unit (APU) Cadence® Tensilica® VP6 processor with Al Accelerator (AIA)

  APU computing power is up to 4TOPs

• DSP

  Single‑core Cadence HiFi 4 Audio Engine DSP

• RAM

  LPDDR4x RAM up to 4266MT/s

  – 4GB

  – 8GB

  – 16GB

• Storage

  UFS (Universal Flash Storage) Version 2.1 with options:

  – 128GB

  – 256GB

  – 512GB

  microSD Card Slot

  eMMC(Not available by default)

• Display

  Dual display outputs via any two of:

  – 1x HDMI TX up to 4Kp60

  – 1x DP (USB Type‑C) up to 4Kp60

  – 1x MIPI DSI up to 2Kp60

• Video Input

  1x Standard HDMI input port, supporting up to 4Kp60 display input

  2x 4‑lane MIPI CSI Ports

• Image Processing

  Single camera with image processing up to 48MP@30fps

  Dual camera with image processing up to 16MP@30fps + 16MP@30fps

• Mutimedia

  AV1/VP9/HEVC/H.264 multivideo decoder up to 4K@90fps

  HEVC/H.264 multivideo encoder up to 4K@60fps

• Network

  1x Gigabit Ethernet port

  1x WiFi 6 & BT 5.2 Wireless Module with triple antenna

• USB

  4x USB 3.0 HOST Type-A Ports

  1x USB 3.0 OTG / HOST Type-C Port

• Audio

  1x 3.5mm Headphone Jack with Microphone Input

• Connectivity

  1x RTC battery connector

  1x RGB power/status/user LED

  40 pin 0.1” (2.54mm) GPIO header supporting a wide range of interface options:

  – 2x UART

  – 2 x SPI bus

  – 2 x I2C bus

  – 1 x PCM/I2S

  – 1 x SPDIF

  – 1 x PWM

  – 1 x ADC

  – 6 x GPIO

  – 2 x 5V DC power in/out

  – 2 x 3.3V power out

• Button

  1x Power Button

  1x User Button

  1x Force Upgrade Button

• Software

  Android

  Ubuntu

  Yocto

• Power Requirements

  Power adapter with fixed voltage of 5V on the USB Type‑C port

  5V Power applied to the GPIO PIN 2 & 4

  The recommended power source should be able to produce, at least, 10W without power consuming devices on USB 3 or 20W with full USB ports load.

• Operating Conditions

  Recommended environmental temperature: 0 ~ 50°C

  This temperature range has been thoughtfully selected to accommodate a variety of use cases, prioritizing efficient performance and minimal heat generation for anoptimal user experience.

• Dimension

  140 mm x 75 mm